|
Question
|
Answer
|
|
Show me
how you would check that the direction
|
Apply the
indicators or hazard warning switch and
|
|
indicators
are working.
|
check
function of all indicators. (ignition for indicators)
|
|
Tell me
how you would check that the brakes are
|
Brakes
should not feel spongey or slack. Brakes
|
|
working
before starting a journey.
|
should be
testerd as you set off. Vehicle should not pull.
|
|
Identify
where the windscreen washer resevoir is
|
Identify
resevoir and explain that you should check
|
|
and tell
me how to check the level.
|
operation
of washers, and keep level topped up.
|
|
Show how
you would check that the brake lights
|
Operate
brake pedal, make use of reflections, or ask
|
|
are
working.
|
someone
to help you.
|
|
Show me/
explain how you would check that the
|
With
ignition off, the steering will be heavy and difficult
|
|
power
assisted steering is working.
|
to move.
With engine running it will be easy to turn.
|
|
Tell me
where you would find the information for
|
Manufacturers
guide, or fuel filler flap. Use a reliable
|
|
the
recommended tyre pressures for this car.
|
guage on
cold tyres. Not forgetting spare. Remember to
|
|
And how
the tyre pressures should be checked.
|
refit
valve caps.
|
|
Show me
how you would check the parking brake
|
Apply
footbrake firmly. Demonstrate by pulling on
|
|
for
excessive wear.
|
handbrake,
showing that the car is secured, and is not
|
|
|
at the
end of its working travel.
|
|
Open the
bonnet, tell me how you check that the
|
Identify
dipstick, describe how to check the oil level
|
|
engine
has sufficient oil.
|
against
the minimum/maximum markers.
|
|
Open the
bonnet, tell me how you check that the
|
Identify
max/min markings on header tank and
|
|
engine
coolant is at the correct level.
|
describe
how to top up to correct level. (Cold engine)
|
|
Open the
bonnet, tell me how you check that the
|
Identify
resevoir, check level against max/min markings.
|
|
brake
system has a safe level of hydraulic fluid.
|
|
|
Tell me
how you make sure your head restraint
|
It should
be adjusted so that the rigid part is at eye
|
|
is
correctly adjusted so it provides the best
|
level,
and as close to the back of your head as possible.
|
|
protection
in the event of a crash.
|
|
|
Tell me
how you would check the tyres to ensure
|
No cuts
or bulges, 1.6mm of tread depth across the
|
|
that they
have sufficient tread depth and that their
|
central
3/4 of the breadth of the tyre and around the
|
|
general
condition is safe to use on the road.
|
entire
outer circumference.
|
|
Show me
how you would check that the horn is
|
Check is
carried out by pushing horn button (turn on
|
|
working
(off road only).
|
ignition).
|
|
Show me
how you would clean the windscreen
|
Operate
washer button (turn on ignition).
|
|
using the
windscreen washer and wipers.
|
|
|
Tell me
how you would check that the headlights
|
Turn on
lights and ignition, then walk round vehicle and
|
|
&
tail lights are working. (no need to exit vehicle)
|
visually
check.
|
|
Show me
how you would set the demister
|
Set all
relivant controls: fan-high; direction-screen;
|
|
controls
to clear all the windows. Front and back.
|
temp-high;
a/c-on; rear screen heater on.
|
|
Show me
how you would switch on the rear fog
|
Turn on
headlights, fog light and ignition. Check warning
|
|
light and
explain when you would use it.
|
light is
on. Explain use: when vision seriously reduced.
|
|
Tell me
how you would know if there was a
|
Warning
light will illuminate if there is a fault with
|
|
problem
with the anti-lock brake system.
|
the
a-b-s.
|
|
Show me
how to switch the headlights from
|
Operate
switch (with headlights and ignition on).
|
|
dipped to
main beam and explain how you would
|
Check the
main beam warning light.
|
|
know the
main beam is on whilst in the car.
|
|